Products › Strip Steel › Punched Parts

Punched Parts

Punched parts are made out of strip steel or spring steel strips from coil – often of stainless steel, which remain in shape after punching and do not require further bending. We produce punched parts of 3 mm to 120 mm wide and 0.1 mm to approximately 3 mm thick.

We use the following materials:

Materials for technical springs, stamped parts and punched parts made of strip material

  • DIN EN 10132-4 | material no: 1.1248
    • EU-standard:DIN EN 10132-4
    • DIN-standard:DIN 17222
    • title (old):C75S (CK75)
    • Standard:spring band hardened and unhardened
    • material no:1.1248
  • DIN EN 10132-4 | material no: 1.1269
    • EU-standard:DIN EN 10132-4
    • DIN-standard:DIN 17222
    • title (old):C85S (CK85)
    • Standard:spring band hardened and unhardened
    • material no:1.1269
  • DIN EN 10132-4 | material no: 1.1274
    • EU-standard:DIN EN 10132-4
    • DIN-standard:DIN 17222
    • title (old):C100S (CK101)
    • Standard:spring band hardened and unhardened
    • material no:1.1274
  • DIN EN 10132-4 | material no: 1.1231
    • EU-standard:DIN EN 10132-4
    • DIN-standard:DIN 17222
    • title (old):C67S (CK67)
    • Standard:spring band hardened and unhardened
    • material no:1.1231
  • DIN EN 10346 | material no: 1.0226
    • EU-standard:DIN EN 10346
    • DIN-standard:EN 10142
    • title (old):DX51+Z
    • Standard:slit strip hot dip galvanized / hot-dip galvanized sheet
    • material no:1.0226
  • DIN EN 10346 | material no: 1.0929
    • EU-standard:DIN EN 10346
    • DIN-standard:EN 10143
    • title (old):HX260LAD
    • Standard:hot-dip galvanized sheet
    • material no:1.0929
  • DIN EN 10346 | material no: 1.0935
    • EU-standard:DIN EN 10346
    • DIN-standard:EN 10143
    • title (old):HX420LAD
    • Standard:hot-dip galvanized sheet
    • material no:1.0935
  • DIN EN 1652 | material no: 2.0065 / 2.0060
    • EU-standard:DIN EN 1652
    • DIN-standard:DIN 1751 / DIN 17670 / DIN 1791
    • title (old):Cu-ETP (E-Cu)
    • Standard:(copper)
    • material no:2.0065 / 2.0060
    • title:CW004A
    • use / remarks:copper
  • DIN EN 1652 | material no: 2.1020
    • EU-standard:DIN EN 1652
    • DIN-standard:DIN 1751 / DIN 17670 / DIN 1791
    • title (old):CuSn6
    • Standard:copper-tin alloys (bronze)
    • material no:2.1020
    • title:CW452K
  • DIN EN 1652 | material no: 2.0321
    • EU-standard:DIN EN 1652
    • DIN-standard:DIN 1751 / DIN 17670 / DIN 1791
    • title (old):CuZn37 (Ms63)
    • Standard:Copper-zinc wrought alloys (brass)
    • material no:2.0321
    • title:CW507L
  • EN 10088-8 | material no: 1.4016
    • EU-standard:EN 10088-8
    • DIN-standard:DIN 17441
    • Standard:Stainless strip steel
    • material no:1.4016
    • title:X6Cr17
  • EN 10088-8 | material no: 1.4301
    • EU-standard:EN 10088-8
    • DIN-standard:DIN 17441
    • Standard:Stainless strip steel
    • material no:1.4301
    • title:X5CrNi18-10
  • EN 10088-8 | material no: 1.4401
    • EU-standard:EN 10088-8
    • DIN-standard:DIN 17441
    • Standard:Stainless strip steel
    • material no:1.4401
    • title:X5CrNiMo17-12-2
  • EN 10088-8 | material no: 1.4568
    • EU-standard:EN 10088-8
    • DIN-standard:DIN 17441
    • Standard:Stainless strip steel
    • material no:1.4568
    • title:X7CrNiAl17-7
  • EN 10088-8 | material no: 1.4571
    • EU-standard:EN 10088-8
    • DIN-standard:DIN 17441
    • Standard:stainless strip steel
    • material no:1.4571
    • title:X6CrNiNoTi17-12-2
  • EN 10139 / DIN 1624 | material no: 1.0330
    • EU-standard:EN 10139 / DIN 1624
    • DIN-standard:EN 10027-1
    • title (old):DC01 ( St 2 )
    • Standard:cold strip unalloyed
    • material no:1.0330
  • EN 10139 / DIN 1624 | material no: 1.0347
    • EU-standard:EN 10139 / DIN 1624
    • DIN-standard:EN 10027-1
    • title (old):DC03 ( RRSt 2 )
    • Standard:cold strip unalloyed
    • material no:1.0347
  • EN 10151 (EN 10088-2) | material no: 1.4310
    • EU-standard:EN 10151 (EN 10088-2)
    • DIN-standard:DIN 17224
    • Standard:stainless strip steel
    • material no:1.4310
    • title:X10CrNi18-8
  • EN 10151 (EN 10088-2) | material no: 1.4401
    • EU-standard:EN 10151 (EN 10088-2)
    • DIN-standard:DIN 17224
    • Standard:stainless strip steel
    • material no:1.4401
    • title:X5CrNiMo17-12-2
  • EN 10151 (EN 10088-2) | material no: 1.4568
    • EU-standard:EN 10151 (EN 10088-2)
    • DIN-standard:DIN 17224
    • Standard:stainless spring flat steel
    • material no:1.4568
    • title:X7CrNiAl17-7

Special materials for technical springs made of strip material

 

 

We manufacture punched parts from 1 piece to up to several millions (in this case as laser cutting) for companies in all kind of branches:

  • Automobile industry
  • Automobile supplier industry
  • Construction industry
  • Chemical industry
  • Electronic industry
  • Household appliance industry
  • IT
  • Plastic industry
  • Aviation
  • Furniture industry
  • Fittings
  • Mechanical engineering
  • Plant construction
  • Measurement technology / control technology
  • Environmental engineering
  • Textile industry

Typical punched parts are washers, rods, plates, screw locks, cover plates, brackets, contacts, perforated plates, fuse plates, wipers, doctor blades and mold plates.

On customer demand punched parts can be further processed: